Shop – Softbi

Single Phase energy Meter ADL10E

001RoBerto — Thu, 04 Mar 2021 00:02:02 +0000

1. General

ADL10 has a compact design DIN Rail mounting kWh meter, and it is very easy to install. It is suitable to the electrical energy statistic and management of internal of factories, buildings, schools, hospitals etc..

2. Technical Feature

F-MPM110 Multifunction Electric Power Meter

001RoBerto — Wed, 03 Mar 2021 23:49:05 +0000

Features

Suit for LV/ HV Voltage System
For low voltage system, direct connect up to 690 V (L-L) AC
For high voltage system, support connect up to 65kV

Ture-RMS Measuring Parameter
True-RMS measuring parameters includes:
U, I, P, Q, S, PF, F, kWh, kvarh, kVAh

Demand Calculation
2 kinds of demand modes: fixed block and rolling block

Power Quality Analysis
31st Harmonic analysis, K factor, unbalance etc.

TOU (Multi-tariff billing), Historical Data of 31 Days and 12 Months
TOU, 4 tariffs, 8 time period in 24 hours

Max./ Min. Record (U, I, P, Q*, S*)

Under/ Over Limit Alarm

64M Bit Memory, Build-in Web
Real-time data inquiry by Web
Save monitoring data (Time interval
settable 1min, 5 min, 10min,15min, 30min)
Support FTP for download memory data

CO2 (Carbon Dioxide) Calculation for kWh

Multiple Communication
BACnet MS/TP Protocol (RS485 port)
MODBUS-RTU Protocol (RS485 Port)
MODBUS-TCP/IP Protocol (Ethernet port )

DI / DO

High Accuracy
Active energy: according to IEC62053-22, class 0.5s
Reactive energy: according to IEC62053-23, class 2

Specification

Basic Function
Real time metering	Voltage	Ua, Ub, Uc, Uab, Ubc, Uca, UL-L avg, UL-N avg
	Current	Ia, Ib, Ic, In, Iavg
	Power	Pa, Pb, Pc, ∑P, Qa, Qb, Qc, ∑Q, Sa, Sb,Sc, ∑S
	Power Factor	PFa, PFb, PFc, ∑PF
	Energy	kWh, kvarh, kVAh *
	CO2 (Carbon dioxide)
	Frequency	F
	Demand & Max. Demand	Dmd_I, Dmd_P, Dmd_Q ,Dmd_S
	Max./ Min. Value	Max./ min. (U, I, P, Q, S)
	Multi-tariff Energy *
	Phase Angle *
Power Quality Analysis	Unbalance	U_unbl , I_unbl
	Harmonic (31st )	THDu, THDi, TOHDu, TOHDi, TEHDu, TEHDi, HRU , RHI
	Harmonic RMS (0-31st )	Harmonic RMS-U , Harmonic RMS-I , Harmonic RMS-P *
	Harmonic energy (1st -13th )
	Voltage crest factor, current K factor, Load rate, Voltage deviation, Frequency deviation Running time record for power-on period and qualified voltage & current *
Setpoint Alarm	Over/ under limit alarm
3DI +2 DO	3 status input + 2 relay output
RS485	Modbus-RTU protocol
Record Function	SOE (event log), Real-time clock ( yyyy-mm-dd hh:mm:ss) *
	Voltage/ frequency deviation, Voltage unbalance record

Optional Module
SW	4 status input (wet contact)	LAN	64M bit memory + Ethernet TCP/IP
SD	4 status input (dry contact)	AI	2 analog input (4-20mA)
C *	The 2nd RS485	AO	2 analog output (4-20mA)
Ep *	2 pulse output	BA	BACnet MS/TP protocol
R	2 relay output
* means some of function can’t be read through BACnet communication port

Parameter	Accuracy	Resolution	Measuring Range
Voltage	0.2%	0.01V	Direct: 690Vph-ph
Voltage	0.2%	0.01V	PT primary: 0.001kV~65kV (settable) PT secondary: 1~398V (settable)
Current	0.2%	0.001A	CT primary: 1~9,999A (settable) CT secondary: 1 A or 5A
Power	0.5%	0.1W/var/ VA	each phase: 0~649.9MW/ Mvar/ MVA
Power	0.5%	0.1W/var/ VA	Total: 0~1949.8MW/ Mvar/ MVA
Power Factor	0.5%	0.001	-1.000~+1.000
Frequency	0.01	0.01Hz	45~ 65 Hz
Active Energy	0.5%	0.1kWh	0~ 99,999,999.9 kWh
Reactive Energy	2.0%	0.1kvarh	0~ 99,999,999.9 kvarh
Apparent Energy	1.0%	0.1kVAh	0~ 99,999,999.9 kVAh
THD	1.0%	0.001	0~100.0%
Individual Harmonic	1.0%	0.001	0~100.0%
Un-balance	1.0%	0.001	0~100.0%

Connection mode	3-phase 3-wire, 3-phase 4-wire, 1-phase 2-wire	Communicati-on	Modbus-RTU Protocol	RS485 serial Baud rate: 2400, 4800, 9600, 19200, 38400bps Address: 1~247
Metering	True RMS, 1 sec refresh time
Input	Rate current: 1A or 5A Rate voltage: Direct 120, 220V, 240V, 277V, 398Vph-N (optional) PT secondary: 1~398V (settable) Frequency: 50/ 60Hz		Modbus-TCP/ IP	Ethernet communication port Support connect 10M/100M ethernet, Modbus TCP/IP, Web, FTP
Overload	120% of rated, continuously Instantaneous current: 10 times/ sec Instantaneous voltage: 2 times/ sec		BACnet MS/TP protocol	RS485 serial Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 76800bps Address: 1…127, excluding 99
Status input	Wet contact, external power supply
Relay output	Node capacity: 250VAC/5A	Dimension (L x W x H)	F-MPM110: Panel: 96 x 96 x 13.5 mm Cut-out: 90 x 90 x 58.6 mm (basic) 90 x 90 x 80.1 mm (optional module) F-MPM110-DR: Panel: 96 x 96 x 12 mm Cut-out: 90 x 90 x 58.6 mm (basic)
Pulse output	Pulse constant: 1000~9999 programmable Pulse width: 60~100ms programmable Formula: 1 pulse = (1÷ pulse constant ×PT ×CT) kWh
Power supply	85 ~265VAC,85~265VDC (When select P1) 100~420VAC, 100~400VDC (When select P2)
Power loss	<5VA	Weight	Basic unit: approx 550gr. Optional module: 50gr.
IP index	IP52 (front panel) and IP30 (case)	Environment	Main Module & and other Modules	Operating temperature: -10℃~ +55 ℃ Storage temperature: -40℃~ +70 ℃ Humidity: 5%~95% non-condensing
Power frequency withstand voltage	AC 2KV/minute
Insulation resistance	≥50MΩ		BACnet Module	Operating temperature: 0℃~ +50 ℃ Storage temperature: -5℃~ +75 ℃ Humidity: 10%~95% non-condensing
Impulse withstand voltage	4kV (peak), 1.2/50uS

Standard(EMC)
Electrostatic discharge immunity test	IEC 61000-4-2,Level 4	Surge immunity test (1, 2/50μs~8/20μs)	IEC 61000-4-5,Level 3
Radiated immunity test	IEC 61000-4-3,Level 3	Conducted emissions	EN 55022,Class B
Electrical fast transient /burst immunity test	IEC 61000-4-4,Level 4	Radiated emissions	EN 55022,Class B

Installation

ETCR4700 Three Phase Digital Phase Meter 0mA~600A 0.00V~600V 3 Phase

001RoBerto — Wed, 03 Mar 2021 23:43:47 +0000

ETCR4700 Three Phase Digital Phase Meter 0.0mA~400.0A 0.00V~600V 3 Phase Meter

Product Description

1. Intelligent design, reduce the complexity of operation, reduce the possibility of misoperation, with high precision, high stability, low power consumption, easy to use and other advantages.

2. The meter adopts large caliber current clamp, suitable for thick wire and large current testing site, Max current range to 600A.

3. Adopt voltage transformer and current clamp to input, no high voltage inside the meter, complete isolation between 3 input channels, safe and reliable.

4. With USB interface, Data storage: 500 groups. Through the system software to upload the storage data to computer, convenient to read, save, report, print historical data, etc.

Technical Specification

Power Supply	DC9V alkaline batteries(1.5V LR6×6)
Clamp	35mm x 40mm
LCD	240dotsX160dots
Range	Voltage:AC 0.00V~600V
	Current:AC 0mA~600A
	Phase:0.0°~360.0°
	Frequency:45.00Hz~65.00Hz
	Active power:0.0W~240kW
	Reactive power:0.0VAR~240kVAR
	Apparent Power:0.0VA~240kVA
	Power factor :-1~+1
	Current vector:0A~1800A
Resolution	Voltage:AC 0.01V
	Current:AC 1mA
	Phase:0.1°
	Frequency:0.01Hz
	Active power:0.1W
	Reactive power:0.1VAR
	Apparent Power:0.1VA
	Power factor:0.001
	Current vector: 0.1A
Accuracy	±0.5% range
Date Storage	500 sets
Data upload function	USB interface, the stored data upload computer, easy to analyze management data
Auto Power-off	15 minutes off automatically
Power Consumption	With backlight: MAX working Current about 80mA, the battery can work continuously for 8 hours
Power Consumption	without backlight:working current about 50mA,the battery can work continuously for 12 hours
Working environment	-10℃~40℃;below 80%Rh
Store environment	-10℃~60℃; below 70%Rh
Phase sequence	Positive: U1, U2, U3 or I1, I2, I3 The cursor flashes from left to right
Phase sequence	Inverting: U1, U2, U3 or I1, I2, I3 The cursor flashes from right to left
The phase range of the measured signal when measuring phase	Measuring U1-U2 phase: 30V ~ 500V
The phase range of the measured signal when measuring phase	Measuring U1-I2 orI1-U2 Phase:10V~500V,10mA~10.00A
Test line length	1.5m
Current clamp length	2 m
measure time	2s/time
Data Hold	Press the HOLD button during the test to hold the data, the «DH» symbol is displayed
input resistance	Test voltage input impedance is:1MΩ
Low battery	When battery voltage decreases to about 7.2V, battery voltage low icon will display, reminding to replace battery.
Withstanding Voltage	Between the instrument line and the shell to withstand 1000V / 50Hz sine wave AC voltage for 1 minute
Insulation	Between the meter line and the jacket shell ≥ 100MΩ
Structure	Double insulated, with insulated vibration-proof jacket
Protection Type	IEC61010-1 CAT Ⅲ 600V,IEC61010-031,IEC61326,Pollution 2
Weight	1360g
Dimension	196mm×92mm×54mm

ETCR3200C test voltage 0~600V clamp grounded resistance test instrument

001RoBerto — Wed, 03 Mar 2021 23:37:24 +0000

ETCR3200C test voltage 0~600V clamp grounded resistance test instrument

Model	ETCR3200C Double Clamp Grounding Resistance Tester
2/3/4 pole Method Measure Grounding Resistance(R)	Range:0.00Ω~30.00Ω; Resolution:0.01Ω; Accuracy:±2%rdg±3dgt
	Range:30.0Ω~300.0Ω; Resolution:0.1Ω; Accuracy:±2%rdg±3dgt
	Range:300Ω~3000Ω; Resolution:1Ω; Accuracy:±2%rdg±3dgt
	Range:3.00kΩ~30kΩ; Resolution:10Ω; Accuracy:±4%rdg±3dgt
Selection Method Measure Grounding Resistance(R)	Range:0.00Ω~30.00Ω; Resolution:0.01Ω; Accuracy:±2%rdg±3dgt
	Range:30.0Ω~300.0Ω; Resolution:0.1Ω; Accuracy:±2%rdg±3dgt
	Range:300Ω~3000Ω; Resolution:1Ω; Accuracy:±2%rdg±3dgt
Earth Voltage	Range:0.0~100V AC; Resolution:0.1V; Accuracy:±2%rdg±3dgt
AC current	Range:0.00mA~600.0A Resolution:0.0mA; Accuracy:±2%rdg±3dgt
Soil Resistivity (ρ)	Range:0.00Ωm~99.99Ωm; Resolution:0.01Ωm		Accuracy :According to the precision of R (ρ=2πaR, a:1 m-100m, π=3.14)
	Range:100.0Ωm~999.9Ωm; Resolution:0.1Ωm
	Range:1000Ωm~9999Ωm; Resolution:1Ωm
	Range:10.00kΩm~99.99kΩm; Resolution:10Ωm
	Range:100.0kΩm~999.9kΩm; Resolution:100Ωm
	Range:1000kΩm~9000kΩm; Resolution:1kΩm
Measurement Method	2/3/4 pole method measurement: Change-pole method, measure current 20mA Max Selection method measurement: Change-pole method, measure current 20mA Max Double clamp method measurement: mutual inductance method, measure current 1mA Max Soil Resistivity: Wenner 4-pole measurement method Voltage to ground: Average rectification(between P(S)-ES interface) AC current: Clamp mutual inductance method
Power Supply	DC 7.4V 2600mAh rechargeable lithium battery
Test Frequency	128Hz/111Hz/105Hz/94Hz(AFC)
Short-circuit Test Current	AC 20mA max	Open-circuit Test Current		AC 40V max
Data Storage	2000 groups	Test Voltage Wave		Sine wave
Data Hold	Data hold function: “HOLD” symbol display	Data Access		Data access function: “READ” symbol display
Overload Display	Exceed measure range overflow function: “OL” symbol display	Current Clamp		Caliber:φ68mm;Connecting line:2M
Tester Dimension	280mm(L)×260mm(W)×160mm(H)
LCD Dimension	LCD Frame Dimension: 128mm×75mm; LCD Display Dimension:124mm×67mm
Total Weight	6690g(include package)
Test Wires	Red 20m, black 20m, yellow 10m, green 10m, red 1.6m, black 1.6m (total 6 pcs wires)
Working Current	Standby: around 45mA (Backlight close 25mA); Measurement:100mA (Backlight close)
Auxiliary Ground Rod	4PCS:φ10mm×150mm
USB Interface	With USB interface,software monitoring, storage data can be uploaded to computer, saved and printed
Interference Test	Automatic recognition of interference signal , interference voltage higher than 5V will display “NOISE” symbol
Auxiliary Grounding Test	Auxiliary ground resistance test function: 0.00kΩ~30kΩ(100R+rC<50kΩ,100R+rP<50kΩ)
Alarm Function	Measure value exceed alarm setting value, will «Toot-toot-toot» alarm indication
Battery Voltage	While battery voltage decreases to around DC 7.2V±0.1V, will display low battery voltage symbol“”, and remind to replace the battery
Overload Protection	Measuring earth resistance: between each interfaces of C(H)-E,P(S)-ES, AC 280V/3 seconds
Protection Level	IP65(close the case status)
Accessories	Tester:1PC;Current Clamp Sensor:2pcs; Ground Rod:4PCS; Testing wires:6PCS; USB data transmission cable:1PCS; Software CD:1 COPY; Tester bag:1PCS; Special charger:1PCS

TCR3200 Double Clamp Earth Ground Resistance

001RoBerto — Wed, 03 Mar 2021 23:25:05 +0000

ETCR3200 Double Clamp Ground Resistance Soil Resistivity Tester Meter

Product Description

Power Supply	DC 9V Zi-Mn dry battery LR14 1.5V 6 PCS
LCD	4-digital super-large LCD display, LCD Display field:124mm×67mm
Range	Ground Resistance:0.00Ω-30kΩ
Range	Earth Voltage:0.0~100V
Resolution	Resistance:0.001Ω
Resolution	Voltage:0.1V
Accuracy	±2%rdg±3dgt
Date Storage	400 sets
Data upload function	RS232 interface, software supervision, storage data can be uploaded to computer, preserved and printed.
Auto Power-off	No
Power Consumption	No Backlight: 45mA Max( turn off Backlight);
Power Consumption	testing:100mA Max(turn off Backlight)
Working environment	-10℃~40℃;below 80%rh
Store environment	-20℃~60℃;below 70%rh
Test method	Precision three-wire measurement, simple two-wire measurement
Measurement method	2/3/4- pole method: change-pole method, measure current 20mA Max Selection method: change-pole method, measure current 20mA Max Double clamp method: mutual inductance method, measure current 1mA Max Soil Resistivity: 4-pole measurement (Wenner method) Earth Voltage: average rectification(between P(S)-ES) AC current: clamp mutual inductance method
Data Mode	Average value, maximum, minimum
Cable resistance verification	Avoid error caused by testing wire such as failed to be fully inserted into tester interface or by poor contact or by user’s replacing or lengthening testing wires, making it more accurate for earth ground resistance measurement.
Measurement Time	Ground Voltage:3 S/time ;
Measurement Time	Ground Resistance:5 S/time;
Measuring Times	Over 5000 times (20Ω range measuring 10Ω for one time and repeat after 25 seconds)
Circuit Voltage	Measuring ground voltage : measuring below AC 600V
Data Hold display	“HOLD”
Data Read display	“READ”
Overflow Display	“OL”
Alarm Function	When measuring value exceeds alarm setting value, there is «Toot-toot-toot»alarm hint
Battery Voltage	When battery voltage decreases to about 7.8V, battery voltage low icon » «will display, reminding to replace battery.
Overload Protection	Ground resistance: between each interfaces of E-P,E-C, AC 280V/3 seconds
Insulation Resistance	Over 10MΩ(between circuit and enclosure it is 500V)
Withstanding Voltage	AC 3700V/rms (Between circuit and enclosure)
Electromagnetic Features	IEC61010-4-3,Wireless frequency electromagnetic field≤1V/m
Protection Type	IEC61010-1,IEC1010-2-31,IEC61557-1,5,IEC60529(IP54),Pollution 2,CAT Ⅲ 300V
Weight	1443g (with battery)
Dimension	215mm×190mm×95mm

Medidor de eficiencia energetica

001RoBerto — Wed, 03 Mar 2021 21:54:29 +0000

Product Description

1. Test function

★ Waveform real-time display (4 channels voltage/4 channels current).
★ True RMS values of voltages and currents.
★ The DC components of voltages.
★ Peak current and voltage values.
★ Minimum and maximum half-cycle RMS current and voltage values.
★ Pharos diagram display.
★ Measurement of each harmonic up to order 50.
★ Bar charts show harmonic ratios of current and voltage of each phase.
★ Total harmonic distortion (THD).
★ Active, reactive, apparent power, by phase and cumulative.
★ Active, reactive, apparent energy, by phase and cumulative.
★ Transformer K factor.
★ Power factors (PF) and displacement factors (DPF or COSΦ).
★ Short-term voltage flicker (PST).
★ Three phase unbalance(current and voltage).

2. Transientcapture function

Monitoring instantaneous change of power grid voltage current parameters, including the voltage current fluctuations, voltage
current surge, sag and short supply interruption, temporary overvoltage, impact current and Current voltage instantaneous
distortion. Instruments can store 150 sets of transient waveform at the same time.

3. Starting current monitoring

Monitoring surge current of line and the startup current when electrical equipment is starting, help to correctly design capacity.
Can be display the RMS rising / falling curve In the startup process, the envelope curve of startup current, waveform of 4
channels current and 4 channels voltage. Recording about 100s after trigger, storage the current /voltage instantaneous and
waveform curve of each cycle in 100s.

4. Trend chart recording and storing function

Store all the test parameters of basic test functions (Urms, Uthd, Ucf, Uunb, Hz, Vrms, Vthd, Vcf, Vunb, PST, Arms, Athd, Acf,
Aunb, KF,W, VAR, VA, PF, COSφ, TANφ),50 voltage harmonics, 50 current harmonics. And create the trend curve. Record data for a
long time according to need(concurrent selection 20 parameters to record data for once every five seconds, you can record about 300 days.).

5. Alarm function

Set the limit values according to need, monitoring the values whether overshoot, if overshoot will generate an alarm log, such as:
voltage, current, unbalance, harmonic ratio, frequency, active power, total harmonic distortion. You can configure 40 different
alarms, each group can set different monitoring parameters (including 50 harmonics, total of 123 different parameters) and limit
values, also can set the shortest time of overshoot. The log can contain up to 12,800 alarms.

6. Snapshot function

Any screen can be saved (screen snapshot), at the same time automatically records the time and test mode. Such as can save voltage
and current waveform, harmonic bar chart, phasor diagram etc. It can save a maximum of 60 screen snapshot.

7. Communication function

Communicate with computer via USB; Monitoring software can display waveform of power quality analysis, read of the tran

Indicador digital de presion

001RoBerto — Wed, 03 Mar 2021 21:15:14 +0000

digital pressure gauge with data logger

Product Description

Name	Digital Pressure Gauge
Measuring range	-0.1~100 Mpa
Precision grade	0.1%, 0.2%, 0.4%, 0.5%, 1% for option
Overload capacity	150%
Display type	Five-digit to show dynamic pressure
Battery power	3A / 2A battery
Measuring medium	Gas, Oil, Air, all liquid compatible with stainless steel
Display range	-1999~9999
Working Temperature	-10~60C
Working Humidity	≤80%RH
Install thread	NPT, BSP, Metric Thread (Made as demand)
Pressure Type	Positive / Negative / Absolute Pressure
Gauge Material	Stainless steel
Response time	≤50ms
Pressure Unit	5-9 kinds pressure unite (Mpa, bar, Kpa, mH2o, kg/cm2, psi. mmH2o, in.WC, mbar etc.)

Sensor de humedad punto de rocio – para proceso

001RoBerto — Wed, 03 Mar 2021 19:58:06 +0000

Dew point meter contains a dew pint display, a VAISALA DRYCAP DMT143 dew point sensor/transmitter.

Feature of Model DMT143 dew point sensor/ transmitter
1.protection of probe: IP65
2.output signal: 4-20mA
3.measurement range: -80 ~ 20°C
4.maximum pressure: 50bara/725psi
5.work ambient: -5~55°C/ 0~ 99%RH
6.accuracy: ±3°C
7.material of probe is 316L stainless steel
8.interface of probe is G1/2» (outer screw thread)
9.max. cable length: 5m

Function of Model XJZ-3S5 dew point display
1.display dew point value
2.output alarm signal via relay (N.O dry contact) when dew point is abnormal
3.detect range is programmable
4.RS485 communication

Technical parameter of Model XJZ-3S5 dew point display
1.rating voltage: AC 220V
2.dew point range: -80 ~ 20C
3.display: 3 pcs of 0.8’’ LED
4.installation method: panel-mounted
5.install hole size: 92x92mm
6.box size: 96x96x90mm

Parameter list table

Code	Definition	Set range	Unit	Typical value	Explanation
C1	Signal type of dew point	0/1		1	0: 4~20mA; 1: 0-1 V
C2	Compensation of dew point	-9~9	°C	0
C3	Upper limit of detect range	0~99	°C	20
C4	Lower limit of detect range	-99~0	°C	-80
C5	High dew point alarm	-99~99	°C	-30
C6	Return difference	5~30	°C	10
A	Communication guest address	1~99		1

Product pictures:

Sensor de punto de rocio – humedad

001RoBerto — Wed, 03 Mar 2021 19:50:56 +0000

Type	S220
Dew point range	-100 °C … 0 °C
Relative humidity range	0 … 99.9 %
Connector	M12, 5 core
Temperature Range	-30 °C … 70 °C
Accuracy	± 2 °C @ -50 °C
Pressure range	-0.1 … 1.6 MPa
Shell	Connector part: Stainless steel 1.4301 (SUS 304) Housing: PC + ABS
Output signal	4 mA --> -100 °C 20 mA --> +20 °C

Indicador universal para mediciones industriales

001RoBerto — Wed, 03 Mar 2021 19:39:53 +0000

Product Show

High Accuracy 0.2%FS Universal Input Digital 7 Segment LED Display Process Indicator with Optional RS485,Relay Output Model No.: MPD510
Accuaracy		±(0.2%FS +1) digital
Power Supply		100-240VAC;24VDC
Size/Installation Size		48x48x100mm
Dispplay		4 digit, 7 segement LED display
Response time		＜0.5second when fliter=0

Input Specification
Input Type	Themocouple, RTD, Analog: 4-20ma, 0-10ma, 0-5VDC, 0-10VDC,programmble fexibly by key
compensation	Built- in auto. thermocouple cold junction compensation when thermocouple input
Filter	0-99, programmable
Offset	0-2000, programmable
Hysteresis	0-2000, programmable

Input Type		Range	Input Type		Range
RTD	PT100	-200 to 600℃	Thermocouple	K	-50 to 1300℃
RTD	CU50, CU100	-50 to150℃		J	0 to 1000℃
Analog Input	4-20mA	-20000 to 20000		T	-200 to 350℃
	0-10mA	-20000 to 20000		E	0 to 800℃
	0-5VDC	-20000 to 20000		R	-50 to 1700℃
	1-5VDC	-20000 to 20000		S	-50 to 1700℃
				B	300 to 1800℃
				N	0 to 1300℃

Modular Output Specification: OUT1:OUT2,OUT3
Relay	NO, NC, NO+NC, 0.8A
Communication	isolated RS485 ,RS232 standard Modbus-rtu protocol,
Retransmission	isolated 4-20ma 2 wire retranmission output
Print	printing output for data in digital and curve
Feed	isolated 5VDC, 12VDC, 24VDC built in as auxiliary power supply for transmitter and sensor
PC software (Communication)	Powerful software function: to display and real time minitor in PC for data in digital curve, Print Data and export the data to excel for further analysi; while memory the data automatically in PC

Detailed Images

Powerful Universal Input, Input Type Can be Programmable by key, working with various sensor &transmitter in a indicator, user freindly

**For temperature, preasure , humidty, flow, level, PH, conductivity, vibration,weight, displaces,speed, Frequency etc variours process parameters data accquistion and reading.

Temperature, Humidity, Presusre, FLow, Level ,Vibraton Application:
Room, Warehouse, Boiler, Furnace, HAVC, Libary, Cold room.
Petroleum, Chemical, Pharmaceutical, Metallurgy, Paper, Electricity, Nuclear power,
Food, Cement, Building, Aviation,Medical University lab,
Marine, Sewage treatment,Water-Supply, River
Machine, Pump,Motor, Fan, Engineer etc

………………….

*RS485,RS232 Serial Communication for Real Time Reading and Monitoring in PC remotely(Optional）

*Photoeltrical Isoalted RS485,RS232 MODBUS- RTU Comm.
*Standard MODBUS-RTU protocol, can be configurable flexibly with SCADA, DCS, PLC, HMI, OPC server for real time reading and monitoring in control room remotely

*Baudrate: 9600 default, 4800,19200.
*Address: 1 to 254